Flight Preparation - SYMA GYRO REMOTE CONTROL SERIES User Manual

●Open the SYMA FPV App, click the "START" icon to enter the control
interface. The phone's screen will display real-time images. A full bar
in the signal strength icon indicates the strongest possible signal.
Open the SYMA FPV App.
③Real-time upload interface icon descriptions
④Real-time aerial photography uploading:
Photo/Record: When the 720P camera is operating normally, press
the photo/record icon in the real-time upload interface to take photos/
videos. (Photos/recordings that were taken can be viewed in the"View
Photo and Video"folder.)
Note: When using the real-time upload operation in the app, the range
for the operating distance of the drone will reduce by half. The
wireless real-time upload function is optimal in spacious
environments.
⑤Storage function of the 720P camera :
When there is a memory card installed in the camera, photos and
videos will be stored in both the phone's internal storage and in the
memory card. When there is no memory card installed in the camera,
photos and videos will only be stored in the phone's internal storage.
Flight Preparation and Turning the Drone ON and Off

1. Flight preparation

Tap the "START" icon.
1.Back
2.Signal
3.View photos and videos
4.Record
5.Take photo
6.Recording time
Step 1:Press the power button of the
remote control.
-10-
The phone's screen will
display real-time images.