SYMA GYRO REMOTE CONTROL SERIES User Manual page 12

2.Turning on the drone
Step 2:Install the battery pack in drone.
Step 3:Press the power button of the
drone for 1-2 seconds to power
on the drone.
Step 4:Push the left joystick (throttle) up
to the highest point and then pull
down to the lowest point. When
the indicator lights in the drone
change from quick flashing to the
continuous lighting, it means that
the drone goes into the flight
standby mode.
Method 1:Push the left joystick (throttle)
to the highest point and then
back to the center, the blades
of the drone start rotating slowly.
Method 2:Push the left and right joysticks
to the bottom inner corners for 1
second, the blades of the drone
start rotating slowly.
Method 3:When the drone is stationary,
press the button B, the drone
automatically takes off and
hovers at a certain height.
-11-