SYMA GYRO REMOTE CONTROL SERIES User Manual page 5

Installation and Dismantling Methods of Mobile Phone
Retaining Clip
Mobile phone retaining clip's attachment method:
1.Insert the phone clip holder
into the connector at the top
of the remote control.
Phone clip holder dismantle:
Battery Changing and Charging Methods for Drone
2.Press the handles to adjust
the jaws.
1.Push the phone clip holder upwards
from behind the remote control.
1.Press the power button on the top of the
drone to make sure the drone in turned
"OFF".
2.Press the fixed components at the bottom
of the battery and pull out the battery.
3.Connect the battery power cord to the
charger, then plug the charger into power
socket. (The indicator light of the drone
will turn red while charging, and turn green
when charging completed. It takes about
150 minutes to complete charging.)
-4-