Flight Preparation - SYMA GYRO REMOTE CONTROL SERIES User Manual

5.Camera storage function:
1.When take pictures or record videos by mobile phone, the photos/videos will be stored
in the folder on the APP control interface of the mobile phone.
Flight Preparation and Switching
the Drone On and Off

1. Flight preparation

2. Turning on the drone
Step 1: Push the power button of the remote
control.
Step 2: Press the power button on the top of
the drone to 1-2S make sure the
drone is turned "ON".
Step 3: Push the left joystick (accelerator) up
to the highest point and then push
down to the lowest point. When the
led indicator lights in the drone
change from quick flashing to
continuous light, it means that the
drone goes into the flight standby
mode.
Method 1: push the left joystick (accelerator)
to the highest point and then back
to the center, the blades of the
drone start rotating slowly.
-10-