Battery Installation For Remote Control; Flight Preparation - SYMA GYRO REMOTE CONTROL SERIES User Manual

Down adjustment camera angle
Photo
Upper adjustment camera angle

Battery installation for remote control:

Battery Installation Method: Open up the battery cover at the back of the
remote control. Correctly place 4 x AA alkaline batteries in the battery box
in strict adherence to the polarity instructions ( batteries are not included).
1. During the battery installation, it must be ensured that the
2. Please do not use new and old batteries together.
3. Please do not use different types of batteries together.
4. Do not use rechargeable batteries.
Flight Preparation and Turning the
Drone ON and Off

1. Flight preparation

①Find a wide place for flying.
②Install the battery in the drone, and place it on a level surface with the
nose of the drone face forward（Figure 1）,press the power button for 2
seconds and then release（Figure 2）. Power on the remote control, push
the throttle joystick of the remote control up to the top and then down to the
bottom（Figure 3）.When the remote control beeps twice and the indicator
light of the drone turns to solid from blink signal connection completed.
polarities of the batteries are matched with that of the battery
box. No battery shall be installed with the opposite polarity.
Video
-5-
Return
One key Take Off/Landing
Battery cover
4 x AA Batteries