Main Specifications - SYMA GYRO REMOTE CONTROL SERIES User Manual

Main Specifications

Drone's Length: 50cm
Drone's Height: 19cm
Battery : 7.4V/2000mAh lithium battery
Rectification Procedures
Problem
The drone
has no
response
The flight
response of
the drone is
not sensitive
The drone is
flying towards
its side in one
direction during
hovering
Reason
1. The drone has entered into
low-voltage protection.
2. When the power of the remote
control is weak, the power light
indicator will blink.
1. The power of the remote
control is weak.
2. There is an interference with
the same frequency as that of
the remote control.
1. The drone is not calibrated
level to the ground.
-17-
Drone's Width : 50cm
Motor's Model : 132
1. Charge up the drone.
2. Change the batteries of
the remote control.
1. Change the batteries.
2. Change to a place where
there is no interference
with the same frequency.
1. Re-adjust the calibration
until the drone is level to
the ground. For further
details, see No.3 on Page
7 for details(Level
calibration function).
Solution