Remote Configuration - Siemens HIPATH HIPATH 1190 User Manual

Miscellaneous Functions
Step by step
Service Menu
>
MORE FEATURES?
>
*991=ADM. REM. ?
92

Remote Configuration

The Remote Configuration feature allows for the remote
configuration of the HiPath 1100.
Using a MF Telephone
Required: The programming extension must have a
conversation in progress with the remote programmer.
Press this key.
:
Select and press to confirm.
:
or
9 9 1 With a conversation in progress enter the programming
*
extension code to transfer control of the HiPath 1100 to
the remote programmer.
The remote programmer must now enter the system's
password on an MF telephone (the default is 31994)
and wait for a confirmation tone.
To set the required configuration, proceed as if the re-
mote telephone was locally connected to the system.
If there is a DID installed
If the system is equipped with a Fax/DID module pro-
grammed as an external line DID.
Enter the code using a remote MF telephone after the
* 9 5
call is answered.
The remote programmer must now enter the system's
password on an MF telephone (the default is 31994)
and wait for a confirmation tone.
To set the required configuration, proceed as if the re-
mote telephone was locally connected to the system.
[1] If the system's serial port is connected to a modem with access to
a telephony network, and the remote PC has a modem installed,
remote configuration can be carried out using the HiPath 1100
Managerapplication. Ask your Support Technician how to do this.
If an external programmer does not carry out the
programming within a specified time period, the
remote configuration process times out.
1