Functions Used For Receiving Calls; Answering Calls - Siemens HIPATH HIPATH 1190 User Manual

Step by step
Speaker
Functions used for Receiving
Calls

Answering Calls

Extensions receive different ringing signals and tones
depending on the type of call being received and the
specified country setting. For example, some types of
ringing signals are:
• When receiving an internal call or callback, the tele-
phone rings twice (two short beeps) at 4-second in-
tervals.
• When receiving an external call, the telephone rings
once (single beep) at 4-second intervals.
• When receiving an Entrance Telephone call, the
telephone rings three times (triple beeps) at 4-sec-
ond intervals.
• When receiving a second call, a short tone (beep) is
heard at 6-second intervals.
• When receiving an Alarm Clock call, the telephone
rings twice (a long and a short beep) at 4-second in-
tervals.
The display shows the caller's number, if Caller ID has
not been blocked by the caller. On the HiPath 1100, if
you record a name associated to the number the name
will also be displayed (if so configured by your system's
Support Technician).
... Using the Handset
<< >>
The extension rings. The display shows the Caller ID in-
formation.
Lift the handset.
... Using the Speakerphone
<< >>
The extension rings. The display shows the Caller ID in-
formation.
Press this key. The LED turns on

Functions used for Receiving Calls

51