Calling An Attendant Console (Ac); Direct Communication Call - Siemens HIPATH HIPATH 1190 User Manual

Step by step
Service Menu
>
*80=SPEAKER CALL ?
Speaker

Calling an Attendant Console (AC)

An Attendant Console can be called at any time for mak-
ing a call or simply for consultation.
Enter the code for calling the Attendant Console.
9
Wait for the call to be answered. Initiate conversation.

Direct Communication Call

This features enables sending voice messages to Sys-
tem telephones using the speakerphone. A message
can be sent to an extension or a Call Group (CG).
When a message is sent, the called party hears a warn-
ing signal before the message is played and the display
shows the caller's name and number.
Required: Destination number uses a Profiset 3030 or
an optiPoint with a speakerphone telephone.
Press this key.
:
Select and press to confirm.
or
* Enter the code for direct messaging.
8 0
Enter an extension or Call Group (CG), e.g., 11/101 or
770).
Record the message.
Answer the call
Lift the handset.
or
Press this key. The LED turns on.
Initiate conversation.
[1] When no extension is programmed as an Attendant and "9" is en-
tered, a busy signal is heard.
Functions used for making calls
1
37