Suffix Dialing; Flash On External Analog Line - Siemens HIPATH HIPATH 1190 User Manual

Step by step
speaker
Service Menu
>
MORE FEATURES?
>
*51=FLASH?
FLASH

Suffix Dialing

Suffix Dialing allows an extension to send information or
MF commands during a call (e.g., for telebanking).).
Required: There is a call in progress and the system ac-
cessed is ready to receive information/codes.
Enter the information requested by the answering ser-
vice.
Wait for data confirmation.
When the consultation is completed, replace the hand-
set.
or
Press this key. The LED turns off.

Flash on External Analog Line

The Flash on External Line feature allows the caller to
send a flash signal when making an external call (e.g:
Master PABX commands).
Required: An external call is in progress.
Press this key.
:
Select and press to confirm.
:
or
* Enter the code for sending a flash signal over the line
5 1
external.
or
Press the FLASH key.
Proceed according to the instructions provided by the
accessed system.
[1] This information may or may not appear on the billing ticket (see
Programming Manual - Call Detail Report - Ticket Cost Code)
The system does not control Cost Codes. The use of Cost Code is
up to the user.
Features used during Call
1
49