Examples Of Using Menus; Exiting Menu Mode; Quickly Accessing Menus - Ericsson R250d PRO User Manual

changes, the words SELECTION STORED! are
shown briefly in the display. The list of settings is
then shown in the display.

Exiting Menu Mode

Press at any menu level to go back one level. Press
NO
to exit menu mode.
CLR
Note! If your terminal receives a call while it is in Menu Mode,
the terminal automatically exits menu mode to allow
you to answer the call.

Quickly Accessing Menus

If you know the numbers associated with the submenu
and setting you want to change, you can quickly access
that submenu and setting by pressing
number of the submenu and then the number of the set-
ting. For example, suppose you want to change the
sound the keys on your terminal make when you press
them. Since
Key Sounds setting is number 3, you could press
then 6, then 3 to go directly to the choices for Key
Sounds.
26
Ö
, followed by the
submenu is number 6, and the
T‚ˆq†

Examples of Using Menus

Turning Minute Minder ON
Ö
,
Changing the Volume of the Ring Tone in Phone Mode
Ö
1 Press . The main menu list is shown in the dis-
play.
Ö Ó
2 Press or until the menu pointer (
Call Setup.
3 Press . The
YES 86GGÃT@UVQ
shown in the display.
Ö Ó
4 Press or until the menu pointer is beside Min-
uteMind.
5 Press . The choices for MinuteMind (ON
YES
OFF) are shown in the display.
Ö Ó
6 Press or until [ON] is enclosed in brackets.
7 Press . SELECTION STORED! is shown briefly
YES
in the display, then the settings list for the
Menu is shown.
T@UVQ
8 Press to exit Menu Mode.
CLR
Ö
1 Press . The main menu list is shown in the dis-
play.
Ö Ó
2 Press or until the menu pointer (
Sounds.

) is beside
Menu settings are
Ã
and
86GGÃ

) is beside
Using Menus