Table of Contents
Advertisement
Using several handsets
De-registering handsets
You can de-register any registered C45
handset from any registered handset.
Press the display key. All regis-
§INT§
tered handsets are displayed.
q
Select the handset to be de-
registered.
Press the display key.
§Menu§
De-register Handset
Select and press
~
Enter the base station system
PIN (default setting: 0000).
Press the display key to con-
§OK§
firm the prompt.
a
Press and hold (idle status).
The handset is de-registered immediately,
even if it is not in idle status.
Changing a handset's internal
number
A handset is automatically assigned the
lowest available number on registration.
In the list of internal subscribers, the
handset is sorted according to its internal
number.
You can change the internal number of all
registered handsets (1–6). Numbers 1–6
can only be assigned once each.
Press the display key.
§INT§
Press the display key.
§Menu§
Edit Handset Number
Select and press
q
Select handset.
~
Enter number (1–6).
Press the display key to com-
§OK§
plete the operation.
You will hear the error tone if an internal
number has been allocated twice.
¤
Repeat the procedure with a free
number.
40
Changing the name of a handset
The names "INT 1", "INT 2" etc. are
assigned at registration. You can change
these names. The changed name is dis-
played in every handset's list.
§INT§
q
§Menu§
Change Handset Name
.
§OK§
~
Locating a handset ("Paging")
You can locate your handset using the
base station.
¤
¤
Ending paging
÷ / c
.
§OK§
Press the display key.
Select handset.
Press the display key.
Select and press
Enter name (max. 10 charac-
ters) and press
Press the registration/paging key on the
base station (page 1) briefly.
All handsets will ring at the same time
("paging"), even if the ringer tones are
switched off.
Briefly press the registration/
paging key on the base station
(page 1) or press the talk key
on the handset.
.
§OK§
.
§OK§
Hide quick links:
Advertisement
Table of Contents
