Writing/Sending An Sms - Siemens Gigaset C450IP Owner's Manual

SMS (text messages)

Writing/sending an SMS

An SMS may contain up to 160 characters.
Writing/sending SMS
¢ ¢
SMS Write Message
§Menu§
~
Write an SMS. For how to enter
the text, see page 77.
Send Text
§Menu§
Select and press
s / ~
Enter the number with dialling
code (including your local area
code) from the directory or key
it in manually, and press
For SMS to an SMS mailbox:
put the mailbox ID at the end
of the number.
The SMS is sent.
Please note:
If you are interrupted by an external call while
writing an SMS, the text is automatically saved
in the draft message list.
SMS status report
Precondition: Your network provider sup-
ports this feature.
If you have activated the status report, you
will receive an SMS with a confirmation
message after sending.
Activating/deactivating a status report
¢ ¢
SMS Settings
§Menu§
Status Report
Select and press
Reading/deleting a status report
¤
Open the incoming message list
(page 35) and then:
q
Select SMS with the
State NOK
Read SMS
§Menu§
Select and press
the status report. Scroll using
q.
34
.
§OK§
.
§OK§
(‰ = on).
§OK§
State OK or
status.
to read
§OK§
Or:
Delete Entry
§Menu§
Select and press
the status report.
Draft message list
In the draft message list, you can save,
edit later and send an SMS.
Saving an SMS in the draft message list
You write an SMS (page 34).
¢
Save Text
§Menu§
Opening the draft message list
¢ ¢
SMS Outgoing
§Menu§
The first entry in the list is displayed, e.g.:
Saved 01/02
11.03.06 19:27
U
§Back§ §Menu
01/02: Current number/total number of SMS
messages
Reading or deleting individual SMS
messages
¤
Open the draft message list.
q
Select SMS.
Read SMS
§Menu§
Select and press
the message. Scroll in the SMS
using q.
Or:
Delete Entry
§Menu§
Select and press
the message.
Writing an SMS
You are reading an SMS in the draft mes-
sage list.
Press the soft key.
§Menu§
Write Message
Write and then send a new SMS
(page 34) or save.
to delete
§OK§
to read
§OK§
to delete
§OK§