Table of Contents
Advertisement
Changing settings for dialling emergency
numbers
The default setting for your phone is that
emergency numbers are always dialled via
the fixed network – irrespective of which
connection type you select. The fixed net-
work always supports emergency num-
bers (e.g. establishing connection to the
local police emergency number).
These emergency numbers are already
preconfigured in your phone's default set-
tings. They are displayed on this website,
but cannot be changed.
You can enter an additional emergency
number.
You can deactivate the setting for emer-
gency numbers to always be dialled via
the fixed network.
Warning:
– If you deactivate the
via fixed line
option, make sure that your
VoIP provider supports emergency num-
bers.
– Emergency numbers cannot be dialled if
the keypad lock is activated. Before dialling,
press and hold the hash key
release the keypad lock.
¤
Enter a phone number as an additional
emergency number in the
number
field.
¤
If you click on
No
always via fixed
line, the connection via
the connection type that you indicate
during dialling is established (e.g. by
pressing and holding or briefly press-
ing the talk key).
If you click on the
phone always establishes the connec-
tion via the fixed network when dialling
one of the emergency numbers
(default setting).
¤
Click on
to save the settings.
Set
Emergency calls always
#
, to
User editable
next to
Emergency calls
Yes
option, your
Specifying the server for
firmware updates and
starting the update
If necessary, you can load updates of the
base station firmware onto your phone.
You can either download the updates
directly from the Internet or from a PC in
your local network.
Using the Web configurator you can spec-
ify from where the firmware should be
loaded.
¤
Open the following Web page:
¢
Settings
Miscellaneous.
Downloading the firmware update
directly from the Internet
The server on which Siemens makes new
firmware versions available for your base
station is set by default. The URL of the
Internet server is displayed in the
field.
server
The firmware is loaded from the Internet if
you do not enter a local file in the
defined firmware file
field before this
update.
Please note:
– When updating from the Internet, checks
are made to ensure that no newer version
of the firmware exists. If this is not the case,
the operation is terminated.
– You should not change the URL for the
Internet server because this address is also
used to load provider information from the
Internet. If you have entered another URL,
you can re-activate the default URL by
restoring the base station default settings
(page 45).
Web configurator
Data
User
65
Hide quick links:
Advertisement
Table of Contents
