Step 5: Setting The National Variants; Step 6 (Pbx Operation Only): Program The Trunk Code - Siemens A30853 Operating Instructions Manual

27.11.98

Step 5: Setting the national variants

a Handset is on-hook
T Enter the national variant,
e.g. "43" for Austria

Step 6 (PBX operation only): Program the trunk code

a Handset is on-hook
T Enter the trunk code e.g. "0"
kap01.fm5
Putting the telephone into operation
It is not necessary to enter MSNs 2 and 3.
MSNs can be entered at any time (
Please note htat the first MSN is also called glo-
bal call number in Austria.
If more than one MSN is entered, take care that
this global call number will not be used. Other-
wise all untis connected to his So bus will be
called.
This setting takes account of specific national features of
the ISDN network:
00.00.00 00:00
P
S 19
19 49_
P
19 43_
Your Profiset 30isdn is preset to the national variant "49"
for Germany. (For further national variants
S
The setting of the national variant is completed.
If you are operating your Profiset 30isdn at a telecommu-
nications system (private branch exchange), you must pro-
gram a trunk code in accordance with the configuration of
the system (trunk code, max. 2 digits
00.00.00 00:00
P
S 24
24 _
P
24 0_
S
The programming of the trunk code is completed.
You can cancel a programming procedure
without making any changes by pressing the
Disconnect key
Profiset 30isdn engl.: A30853-X300-B107-1-7619
page 31) :
h
!
page 31).
page 32.)
5