Clearing Memory; Checking The Settings (Status) - Siemens A30853 Operating Instructions Manual

27.11.98

Clearing memory

Checking the settings (status)

kap01.fm5
Programming the telephone settings
You can clear any of the following memories via input of certain
codes:
"0" clear the destination dialling memory
"1" clear the speed dialling memory
"2" clear the call list memory
"3" clear the number redial memory
a
Handset is on-hook.
S25
Start the programming procedure.
T
Enter the password if necessary.
0 ... 3
Press one of the keys 0 ... 3.
S
Exit the programming procedure. The selected memory
is cleared.
You can check the settings of your Profiset 30isdn. The display
shows the two-digit code (
phone settings", "Programming keys on the telephone") which
you start each programming procedure with and the currently
set value. If the setting allows more than one value (e.g. MSN 1,
2 and 3, destination dialling keys 1 and 2, speed dialling keys 0-
9 a.s.o.) each memory and the relevant setting are displayed.
You can scroll forward and backward using the keys
The symbol "_" on the display indicates values which are not
yet set (e.g. not assigned MSN, destination dialling or speed di-
alling keys)
You can view the current settings of the lock by entering the
code "30" . The values displayed under the codes "40" and "41"
could be necessary if you contact the hotline.
a or d
Handset is on-hook, or a call is in progress.
S00
Start the programming procedure.
T
Enter the password if necessary.
+ / -
Scroll through the settings via the +/- keys.
S
Exit the programming procedure.
Profiset 30isdn engl.: A30853-X300-B107-1-7619
page 27: "Programming the tele-
+ -
and .
39