Disconnecting One Party; Three-Party Conference - Siemens A30853 Operating Instructions Manual

27.11.98

Disconnecting one party

Three-party conference

kap01.fm5
The call numbers of the other parties are only
displayed if they are known.
Call numbers are not displayed, for example, in
the case of incoming calls with number sup-
pression or calls from analog stations.
You can disconnect one party in the course of a consulta-
tion call. Afterwards,you are automatically connected to
the remaining party.
d
A consultation call is in progress.
h
Press the Disconnect key.
0 or 1
Enter the code "0" or "1" .
Enter "0" if you want to disconnect the party, who is put
on hold (his/her call number is not displayed).
Enter "1" if you want to disconnect the party, who you
are talking to (his/her call number is displayed).
In a conference, all parties can listen in and talk to each
other.
You must apply to your local network operator for this
feature. Inquire about the respective charges.
In the course of a consultation call you can connect
yourself to the other two parties and set up a three-party
conference.
d
A consultation call is in progress.
g
Press the Conference key.
Your are now connected to the other two parties.
The symbol K appears on the display.
Profiset 30isdn engl.: A30853-X300-B107-1-7619
Calls involving two or more parties
23