Callback - Siemens A30853 Operating Instructions Manual

27.11.98
Deleting the call list

Callback

Initiating a callback
kap01.fm5
Deleting the call list is possible via the "Clearing memo-
ry" function (
S 25
Start the programming procedure.
2
Enter the code "2" .
S
Confirm the deletion of the call list.
The call list memory is also cleared when the
ISDN connecting cord has been unplugged.
Deletion of single calls from the call list is not
possible.
You must apply to your local network operator for this fea-
ture. Inquire about the respective charges.
If you have activated callback because the party you called
was busy, you are automatically called back as soon as the
other party finishes his/her call.
If you are engaged in a call when callback takes place, you
are called again on completion of your call.
Prerequisite: You called a party whose line was busy at
the time.
If the callback symbol Y appears on the display, you can
initiate a callback.
f
Initiate callback with the Callback key.
b
Replace the handset.
You can activate one callback only. Activating
further callbacks is possible if an existing call-
back has been accepted or deleted.
Profiset 30isdn engl.: A30853-X300-B107-1-7619
Outgoing and incoming calls
page 39).
15