Community (Com) Group Speaker Call - Siemens 300 Series User Manual

Community (Com) Group Speaker Call

To make a com
group speaker
call
Note
A com group call overrides Forwarding and (on CBX
Release 9006.2 and higher) Do Not Disturb mode.
(See "Forwarding" on page 5–3 and "Do Not Disturb"
on page 6–3.)
Community (Com) Group Speaker Call lets you make
a two-way call to the speaker of another telephone in
your community (com) group by dialing a short code
instead of an extension. If the party you are calling
does not have a speakerphone, they must pick up the
handset to answer.
This feature is much like the Two-Way Speaker Call
feature, except that the party you are calling must be
a member of your community (com) group. (See
"Two-Way Speaker Call" on page 3–32.)
For more information about com groups, see "Com-
munity (Com) Group Call" on page 3–18.
Press the Intercom (INTRCOM) key, or get a
dial tone and dial * * 6.
Dial the member's com code.
You will hear the confirmation tone. The other
party's telephone will beep twice.
Begin speaking. If the other party does not have
a speakerphone, they must pick up the handset
to answer. You and the other party will hear re-
peated intrusion tones until they pick up the
handset or you hang up.
Making Calls 3–19