Siemens 300 Series User Manual page 125

To cancel
Variable
Forwarding
Dial the extension to which you want your calls
forwarded. For all-condition forwarding (# 9 1,
# 9 2, # 9 3), you can dial 9 and an outside num-
ber as your forwarding target.
If your telephone has a FORWARD key, the
FORWARD status light turns on to
indicate that Variable Forwarding is active for
your extension. If you have a display telephone,
STORED is displayed, followed by the option
you chose and the number to which your calls
are forwarded.
You will hear the confirmation tone.
Hang up. Your primary line key status light
flickers.
Note
A call made from your Variable Forwarding target to
your extension will always ring through.
You can only forward calls to an outside number if
your telephone has been assigned a special class of
service.
Press the FORWARD key. Your primary line
key status light and the FORWARD status light
turns off. If you have a display telephone, the
forwarding option and the number to which
your telephone was previously forwarded is
displayed, followed by OFF.
OR
Get a dial tone.
Dial # # 9 1.
Moving Calls 5–9