6 Connecting The Unit; Opening And Closing The Housing; Removing And Attaching The Rear Panel - Henny Penny FlexFusion Spacesaver Installation Manual

6 Connecting the unit
DANGER
CAUTION
NOTICE

6.1 Opening and closing the housing

6.1.1 Removing and attaching the rear panel

NOTICE
Risk of personal injury and property damage from electric shock
• Before working on the unit, ensure that the unit is dead.
• Do not operate the unit with the housing open.
Risk of injury from sharp edges
• Wear protective gloves.
Risk of property damage from damage to the lines
• Remove and attach housing components carefully.
Remove the rear panel.
Image: Remove the rear panel.
1. Unscrew the screws on the rear panel.
2. Remove the rear panel.
Attaching the rear panel
Risk of property damage from leaky housing
• Check seals when attaching the housing parts.
• Replace damaged seals.
Installation instructions
Connecting the unit
19