Advertisement
Available languages
Available languages
EN
SAFETY INSTRUCTIONS
Do not use the adapter if it shows any signs of damage.
This adapter is intended for use in a dry indoor environment. Protect it from moisture,
water or high temperatures, falls, impacts and keep it out of the reach of children.
During use, the adapter may heat up slightly, pay extra attention to excessive
overheating. In this case, disconnect the adapter from the mains.
Keep the adapter and all its inputs clean, unplug the adapter before cleaning, clean
only with a dry cloth.
When the adapter is not in use, always disconnect it from the mains.
USAGE
To charge the device, connect the USB-A cable to the input in the adapter and connect the
other end of the cable to your device. Always check compatibility with your device before
using the adapter.
WARRANTY AND LIABILITY
As the manufacturer has no influence on the installation, the warranty only applies to the
product itself. The manufacturer is not responsible for damage to persons or property
caused by incorrect installation, maintenance or operation that is not described in this
manual. Do not modify or alter the product. Use other than that described in this user
manual is not permitted and will result in loss of warranty and liability.
Manufacturer/Importer: TESLA Electronics LTD, org. složka, Blučina 704, Czech Republic
Model: TESLA Power Charger QC50/Input: 100 - 240 V, 50/60Hz/Output: 2.4 A/5 V
The manufacturer reserves the right to change the technical specifications of the product.
DECLARATION OF
CONFORMITY
We, TESLA Electronics LTD,
org. složka, we declare that
this device complies with the
essential requirements and
other relevant provisions of
the standards and regulations
relevant to the type of device.
Detailed version of the user
manual:
Advertisement
