Installation - Tesla WALL CONNECTOR Installation Manual

Step-by-Step Installation Instructions

Installation

1. Use the low profile bracket as a guide to
mark the location on the wall for the
mounting screws.
• Use a level to ensure that the marks
are perfectly vertical.
• Space the holes 4.5" (114 mm) apart.
• For U.S.A. installations, position the
bracket so that the Wall Connector is
located at a maximum of 60" (150 cm)
from floor level. The minimum height
is 18" (45 cm) if mounting indoors,
and 48" (122 cm) if mounting
outdoors.
Note: Ensure that the minimum and
maximum height of the bracket is carefully
selected. It should be installed out of the
way of any reasonably foreseeable
impacts.
2. Attach the bracket using fasteners that
are appropriate for the type of wall
material, drilling pilot holes if necessary.
Use the supplied screws only if mounting
the bracket directly to a wooden stud. If
mounting the bracket directly to a
wooden stud. If mounting to another type
of wall (hollow, masonry, etc.), use
fasteners that are long enough to securely
anchor the Wall Connector and can hold
at least 80 lb (36 kg).
10
3. Plug in the Wall Connector to the wall
power outlet.