Using The Printer Lan In A Windows Environment - Oki PT340 Online Manual

2 Using the Printer LAN in a Windows Environment

This section describes how to connect to the printer LAN and print using TCP/IP in a Windows environment.
The procedure for printing using the printer LAN over the TCP/IP protocol is as follows.
*Install the printer driver on the computer you are using in advance.
*Administrator privileges are required to configure the settings.
*If you are using Windows 8, Windows 7, Windows Server 2012 or Windows Server 2008
R2 and the [User Account Control] screen appears, select [Yes].
*If you are using Windows Vista, Windows Server 2008 and the [User Account Control]
screen appears, select [Allow].
<Guide> If you are printing using the regular print client on Windows XP, Windows Server
2003, Windows Vista, Windows 7, Windows 8, Windows Server 2008/2008 R2,
Windows Server 2012, or WEPOS/WEPOS2009, refer to "Printing Using the Regular
OS Print Client".
Copyright (C) 2013 Oki Data Corporation
Check the network settings on the computer
Configure the IP address using the LAN Settings Tool
Configure the printer port using the LAN Settings Tool
Printer LAN Online Manual 1.1.0.0
Print
6 of 34