Switching Temporarily To Tone Dialling; Setting Pauses - Siemens Gigaset 4015 Operating Instructions Manual

Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619
Connecting the base station to a PABX
Press keys:
TEMP TONE
p. ex.
p. ex.
58

Switching temporarily to tone dialling

If your PABX still operates with dial pulsing (DP) but
tone dialling (DTMF) is required (e.g. to check the mail-
box), you must switch to tone dialling (DTMF) during
the call.
Prerequisite: You are conducting a call!
Open the menu.
MENU
Select the menu item and confirm.
Tone dialling is active.

Setting pauses

Pause after line seizure
With this function you can set the length of the pause
inserted automatically after pressing the talk key
before transmitting the telephone number.
Open the menu.
MENU
Initiate the setting.
Enter the pause length and confirm.
1 second = 1; 3 seconds = 2; 7 seconds = 3;
2.5 seconds = 4.
The setting is saved.
Pause after recall key
With this function, you can set the length of the pause
that is inserted after holding down the
Open the menu.
MENU
Initiate the setting.
Enter the pause length and confirm.
1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms
The setting is saved.
anlagen.fm 17 .09.01
- key.