Table of Contents
Advertisement
Gigaset 4015 Classic, GBR, A31008-G4015-B101-1-7619
Appendix
Maintenance
Simply wipe the base station and handset with a damp cloth or an
antistatic wipe. Never use a dry cloth as this can cause static
discharge!
Troubleshooting
If your telephone does not behave the way you want it to, first try to
solve the problem using the following list.
Fault
No
display.
No reaction to
keystroke.
No radio connec-
tion to the base
station – all
displays flashing.
Handset that is in
the base station is
not charging.
Handset/base sta-
tion does not ring.
Your caller on the
telephone cannot
hear you.
The incoming call
number is not
displayed al-
though CLIP is set.
anha.fm
Possible cause
Handset not
activated
Batteries empty
Keypad protection
activated
Handset outside the
base station range.
Handset not
registered
Base station not
activated
Line seized by a
second handset for a
long period.
Ringer off
The
INT
key was
pressed – the micro-
phone is "muted" .
The telephone
number transmis-
sion
is blocked.
17 .09.01
Appendix
Solution
Hold down the end call
key
for 1 second
Charge or replace the
batteries (see page 7).
Hold down the
key
for 1 second
Move closer to the base
station.
Register the handset
(see page 41).
Check the connector at
the base station (see
page 6).
Maximum charging pow-
er is only possible while
nobody is making calls.
Activate the ringer
(see page 51/page 54).
Press
GO BACK
OK
re-activate the micro-
phone.
Callers must permit the
transmission of their tele-
phone numbers at their
network providers.
to
59
Hide quick links:
Advertisement
Table of Contents
