Selecting A Ring Tone; Selecting Tone Or Pulse Dialing; Storing Your Local Area Code (For Use With Caller Id Services) - Siemens 242 Owner's Manual

Selecting a Ring Tone

1. Press .
2. Press the
"RING TONE
DIAL MODE
3. Press .to select "RING TONE"(current tone will sound).
RING TONE
2
4. Press the
5. Press to save the ring tone setting.
6. Press to exit.

Selecting Tone or Pulse Dialing

To set the dial mode used by your local phone service (tone or pulse),
1. Press .
2. Press the
"DIAL MODE
YOUR AREA CODE
3. Press .to select "DIAL MODE" .
4. Press the
PULSE DIAL
# $TO CHANGE
5. Press to save a dial mode setting.
6. Press to exit.

Storing Your Local Area Code (for use with Caller ID services)

When you program a local area code, calls from that area code will be stored in the
call log without the area code. This makes a local number readily available for call
back or for moving it to a memory location. To store the local area code,
1. Press .
Siemens 242 Cordless Phone
key twice to move to "RING TONE" .
or key to change the ring tone (selected tone will sound).
key three times to move to "DIAL MODE"
or key to change between tone and pulse.
TONE DIAL
# $TO CHANGE
9 Owner's Manual