Changing Ringer Tones; Activating/Deactivating Suppression Of The First Ring Tone; Activating/Deactivating - Siemens Gigaset C350 Manual

Changing ringer tones

u
Volume:
You can choose between five volumes
(1–5; e.g. volume 2 = ˆ) and the
"crescendo" ring (6; volume increases
with each ring = ‰ ).
u
Melody:
You can select a melody from the list of
pre-loaded ringer melodies, or you can
download a melody or install one by
SMS (page 23). The first three melodies
are the "classical" ring tones.
You can also set different melodies for the
following functions:
u
Calls: For external calls
External
u
Internal Calls: For internal calls
Setting ringer volume
The ringer volume is the same for all types
of ring.
With the handset in idle status, open the
menu
Ringer Volume
briefly.
¢
Audio Settings
§Menu§
q
Adjust the volume and
press
§OK§
a
Press and hold (idle status).
Setting ringer melody
Set different ringer melodies for external
and internal calls.
¢
Audio Settings
§Menu§
Select External Calls
Calls and press
q
Select melody (‰ = on) and
press
§OK§
a
Press and hold (idle status).
by pressing t
¢
Ringer Volume
.
¢
Ringer Melody
/ Internal
.
§OK§
.
Activating/deactivating the ringer
You can turn off the ringer on your hand-
set before you take a call or while the
phone is in the idle state. The ringer can-
not be re-activated while an external call is
in progress.
Deactivating the ringer
P
Press the star key and hold
until you can no longer hear
the ringer tone.
Re-activating the ringer
P
Press the star key and hold.

Activating/deactivating

suppression of the first ring tone
The phone identifies an incoming SMS
from the first network signal.
5 4 O 1 O
§Menu§
1
To suppress the first ring tone.
§OK§
Or:
S
To hear the first ring tone.
§OK§
Please note:
If first ringer tone suppression is deacti-
vated, then every incoming SMS will be
signalled by a ring tone. If you take this
type of "call" at the first ring tone, you will
lose the SMS.
Handset settings
33