Activating/Deactivating The Suppression Of The First Ring Tone; Activating/Deactivating; Advisory Tones - Siemens Gigaset C340 User Manual

You can also set different melodies for the
following functions:
u
External Calls: For external calls
u
Calls: For internal calls
Internal
Setting ringer volume
The ringer volume is the same for all types
of ring.
With the handset in idle status, open the
menu Ringer Volume
briefly.
¢
Audio Settings
§Menu§
q
Adjust the volume and
press
§OK§
a
Long press (idle status).
Setting ringer melody
Set different ringer melodies for external
and internal calls.
¢
Audio Settings
§Menu§
Select
External Calls
and press
Calls
q
Select melody (‰ = on) and
press
§OK§
a
Long press (idle status).
Activating/deactivating the ringer
You can turn off the ringer on your hand-
set before you take a call or while the
phone is in the idle state. The ringer can-
not be re-activated while an external call is
in progress.
Deactivating the ringer
P
Press the star key and hold
until you can no longer hear
the ringer tone.
Re-activating the ringer
P
Press the star key long.
by pressing t
¢
Ringer Volume
.
¢
Ringer Melody
/
Internal
.
§OK§
.
Activating/deactivating the
suppression of the first ring tone
The phone identifies an incoming SMS
from the first network signal.
5 4 O 1 O
§Menu§
1
To suppress the first ring tone.
§OK§
Or:
Q
To hear the first ring tone.
§OK§
Please note:
If first ringer tone suppression is deacti-
vated, then every incoming SMS will be
signalled by a ring tone. If you take this
type of "call" at the first ring tone, you will
lose the SMS.

Activating/deactivating

advisory tones

Your handset uses 'advisory tones' to tell
you about different activities and statuses.
The following advisory tones can be acti-
vated and deactivated independently of
each other:
u
Key beep: Each key press is acknowl-
edged.
u
Acknowledge tones:
– Confirmation beep (rising tone
sequence): at the end of an entry/
setting, when the handset is placed
in the base station and on arrival of
an SMS or a new entry in the calls
list.
– Error beep (descending tone
sequence): when you make an
incorrect entry.
– Menu end tone: when scrolling at
the end of a menu.
u
Battery low beep: the battery needs to
be charged.
The confirmation beep when the handset
is placed in the base cannot be deacti-
vated.
Handset settings
29