Call Options - Siemens C65 User Manual

left page (31) of C65 Hera FUG us, A31008-H7800-A40-1-4A19 (01.04.2004, 17:26)
Conference
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your ser-
vice provider or may have to be
enabled specially.
A connection has already been
established:
Open menu and select
§Options§
Hold. The current connec-
tion is maintained.
Now dial a new number.
When the new connec-
J
tion is established ...
... open menu and select
§Options§
Conference. The held call is
joined.
Repeat procedure until all partici-
pants are linked together
(up to 5 participants).
End
All calls in the multiparty
conversation are ended
B
when the End key is
pressed.

Call options

b
The following functions are only
available during a call:
Open menu.
§Options§
Hold
Microphone
on
Handsfree
Volume
Default book
Conference
Time/
charges
Send DTMF
Call
transfer
=
Main menu
Call status
Calling
Hold current call.
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also: Press and hold.
*
Call via the loudspeaker.
Adjust handset volume.
Display Phonebook/
Addressbook.
(See p. 31)
Display talktime that has
elapsed so far and (if set)
cost incurred during the
call.
Enter control codes (num-
bers) for remote inquiries
to an answering machine.
Connect the original call
with a second call. For you,
both calls are now ended.
Access to the main menu.
List all held and active calls
(e.g. participants in a con-
ference).
31