iProDAC Status Screen - Press F5
Figure 7-7 -
Press % SETUP to access the iProDAC
3.
Setup screen (Figure 7-8).
4.
Press Ctrl + 0 and select F Sensor Offsets or
press
and scroll through the tabs to access the Sen-
sor Offsets (Figure 7-9).
iProDAC Setup Screen in E2 - Ctrl + 0 Tab
Figure 7-8 -
Menu Sensor Offsets
Discharge Air Controller (DAC) Manual
to access the C0: MORE tab
Enter the appropriate offset value
5.
(Figure 7-9).
Sensor Offset Properties in E2 - C0: MORE
Figure 7-9 -
Tab
Software Overview • 27