Advertisement
DIMENSIONS / INSTALLATION
ST2060 mat chrome, ST3060 black
ST3560 flush, black
Affix the 6mm shaft with the provided screw in the dial and cover the screw with the small
label.
Install the ML6740 lock first according to the installation instruction.
Fasten the dial ring with two M4 or 8/32" countersunk screws (not included) in a way that the
opening index is positioned at the 12 o'clock position.
M-LOCKS BV
Vlijtstraat 40
NL-7005 BN Doetinchem
With the lock in OPEN position (bolt retracted) hold the dial in a
way that approximately "93" is lined up with the opening index
and push it into the lock.
The shaft cannot be pulled out.
ver. 1.1 2011 04 21
2 of 2
Tel: +31 (0)314 376 876
Fax: +31 (0)314 376 878
www.m-locks.com
Advertisement
