Ring delay
Step
by
Using the ring delay feature you can configure a handset for each individual
step
incoming MSN to delay response to the call signal. However, during this ring
delay time the handset can accept the call using the
a call signal queuing.
Setting ring delay
Press
1.
Select using [
2.
→
Setup device
Select using [
3.
Select using [
4.
Select using [
5.
Set
No. of rings
6.
Picking up calls during ring delay
A call is coming through to the assigned MSN.
1.
Press the
2.
Press [YES] . You can then answer the call.
3.
or
Press [NO] . You can set up your own external or internal call.
3.
Conducting calls with more than one subscriber
Internal enquiry call
You would like to call an internal subscriber during an external call.
Press
1.
)
A connection is established with the internal subscriber.
→ [LIST].
or
1.
Select using [
2.
A connection is established with the internal subscriber.
If the internal subscriber dialled is busy:
Press [BACK]: You are reconnected with the external caller.
3.
The internal subscriber answers the call:
or
Toggling: you can switch between call parties with [
3.
Three-way calling: press [CONF .]. This establishes the conference circuit.
or
3.
*
for selection menus.
Z
] and [OK ]:
Base Settings
|
.
Z
] and [
]: (required internal subscriber) .
Z
] and [OK ]:
@
Ring delay
Z
] and [OK ]: (required MSN) .
using
-
E
key, the following appears in the display:
)
and enter the call number for the second subscriber.
Z
] and [OK ]: (required internal subscriber) .
Convenient telephoning
→
Settings
«
.
,
= off.
Accept?
function without
→
Setup user
Accept?
] and [
].
49