Manual Registration - Siemens Gigaset 4110 Comfort Operating Instructions Manual

Registering and de-registering handsets

Manual registration

Step
by
step
Gigaset 4000Comfort/Micro handsets on a Gigaset
4110isdnbase
If a handset is already registered on another base, you must now specifically
register it on your own base.
Press
1.
Select using [
2.
Select using [
3.
Key in the system PIN and confirm with [OK ] (factory setting: 0000) –
4.
Regstr.Procedure Base 1
Long-press the key on the underside of the base.You can confirm the internal
5.
number you are offered with [OK ], or select another internal number with [
and confirm it with [OK ].
In the event of full occupancy, please de-register a registered handset
first.
After successful registration the handset will return to the idle condition. The
internal number will appear on the display (example: "Internal 11").
Registering Gigaset 2000/3000 handsets and other
manufacturers' handsets on the Gigaset 4110isdn base
Prerequisite:
Other manufacturers' handsets must support the GAP standard.
Not all the functions of your handset may be available despite this.
GAP
Your Siemens handsets and bases support the GAP profile. On page 96 you will
Info
find a compatibility table for using simple or older handsets on your base.
Register your handset according to the relevant handset's operating instruc-
1.
tions.
Press the key on the underside of the base for longer than 1 second.
2.
After registration, your Siemens base will assign the handset the first free in-
ternal call number.
18
*
for selection menus.

] and [OK ]: Settings

] and [OK ]: Base 1
will be displayed, for example.
Generic Access Profile =
Standard for interoperation between handsets and bases of other
manufacturers
→
Register H/Set .
- Base 4 .

]