Displaying A Cost Overview; Display Last Call Costs - Siemens Gigaset 4110 Comfort Operating Instructions Manual

Charge and call duration display
Entering the price per unit
Step
Before the charges for each call can be calculated, the currency and price per
by
step
unit must be defined (the default setting is
Units cent.off.
Press
1.
Select using [
2.
Select using [
3.
Select using [
4.
Rate ----
5. Enter the basic price and confirm with [
Select using [
6.
If you would like to set an additional currency:
Enter the currency and confirm [
7.
Select using [
8.
If No rate
Confirm the prompt for accounting method with [YES].
9.
All accounts are reset and the option is highlighted.

Displaying a cost overview

Depending on the setting, call or charge units are displayed for each internal
subscriber, for each configured MSN, and for the system as a whole.
Press
1.
Select using [
2.
Select using [
3.
The accounts for each internal subscriber and for each configured MSN are dis-
played. The total amount is shown at the start of the list.
Deleting the cost overview total
You are in the cost overview display:
Select using [
1.
Select using [
2.
Totalled and individual costs must be deleted separately. This means that if you
Info
delete an MSN total for example, the individual charges incurred remain stored
in the handset and must be deleted individually.

Display last call costs

The total costs and the costs for the last call made on this handset can be dis-
*
played when the "talk" key is pressed.
1.
Press [
2.
( before menu item = ON / none = OFF)
Press
3.
68
*
must be set (default).
for the selection menus.
Z
] and [OK ]:
Z
] and [OK ]:
Z
] and [OK ]:
(without decimal point).
Z
] and [OK ]:
Z
] and [OK ]:
was already set a prompt is displayed.
*
for the selection menus.
Z
] and [OK ]:
Z
] and [OK ]:
|
Z
] and [ ]: (required cost overview) .
Z
] and [OK ]:
is pressed for the menu.
Z
] and [OK ] to select:
C
.
No rate
Costs .
Type of calcul.
Rate --.-- (with decimal point) or
|
].
Save entry
.
|
].
Save entry .
Costs .
Cost overview .
Delete amount .
→
Costs Last charge
). For determining the costs,