Table of Contents
Advertisement
Sending an SMS message (without saving it)
Step
by
Produce an SMS message as described on page 72.
1.
step
Select using [OK]:
2.
Enter the recipient's call number (destination number). The call number must
3.
always include the local area code (even within the same local network). "00"
must be entered for call numbers with an international prefix. You cannot enter
"+" .
Examples:
089 12345678 - national call number in the German fixed network
0171 1234567 - call number in the mobile radio network
or
Use [
3.
Select the required entry and confirm with [OK]. The call number will be trans-
ferred.
If you have stored this call number in your directory with a prefix code, this
code must be deleted for sending an SMS message.
Use [
4.
Select using [OK]:
5.
The SMS message will be transmitted; the SMS centre will automatically insert
your line number as the sender's address.
G
If you are called or receive an SMS message while writing or sending one
Info
yourself, the SMS message you were processing will be saved in the outbox
list. You can answer the call and resume writing or send your SMS message
later.
G
You should bear in mind that some service providers charge for setting up a
connection to the SMS centre.
G
SMS messages that cannot be sent after several attempts will be saved to
the inbox list with an error status attached (see error code list on page 78.
G
All settings and the saved SMS messages will be retained after a power
failure.
Interrogating available memory space
You can interrogate the available space in your SMS memory (in %).
Press
1.
Select using [
2.
Select using [
3.
displayed as a percentage.
Send Text
] to open the menu and select using [
] to open the menu.
Send
and press
*
for selection menus.
] and [OK]:
Text Message
] and [OK]:
Available memory
Short messages (SMS)
] and [OK]:
C
.
The free memory space will be
No.from dir..
73
Hide quick links:
Advertisement
Table of Contents
