Manual Registration - Siemens Gigaset 4210 User Manual

Gigaset 4015 Comfort, USA, A31008-G4015-B102-1-7619
Handset Operation
Press keys:
D
åååååååååååååååååååååååååååååååå
H/Set Settings
D
åååååååååååååååååååååååååååååååå
Reg. Handset
D
40

Manual Registration

If automatic registration does not work properly, or you
wish to register your handset to another base station
you may manually register a handset. A handset can
only be registered to one Gigaset base station at a
time.
Step 1: On the Handset
MENU Press Menu.
[
Scroll to H/Set Settings and press OK.
[
Scroll to Reg. Handset and press OK.
[
Select the base station (
less you are registering your handset to an additional
base).
[
Enter the PIN (factory setting: 0000).
o
Step 2: Underside of the base station
Hold down the Page/Registration key on the underside
of the base station for approximately 10 seconds until
a signal tone is heard at the base station.
When the handset has been successfully registered,
the intercom number is shown (for example, "INT1").
If all internal handset numbers are assigned, the inter-
com number 4 is reassigned. The handset that has
been registered under number 4 will be deregistered.
mobilt_an.fm 25.06.03
is recommended un-
Base 1