Using Dual-Tone Multifrequency Signalling - Siemens 3000 Operating Instructions Manual

Conducting calls – enhanced functions
Step-by-Step
> <
Night Service - OFF?
> <
Service?
> <
* 53=Tone dialling?
44
Deactivating night service
c
Press the Talk key.
Menu Call the system menu.
[
Select and confirm the menu item.
a
Press the On-hook key to end the process.
Using dual-tone multifrequency sig-
nalling
Your handset operates on the basis of digital informa-
tion transmission. However, certain applications, e. g.
answering machines, can only be controlled using ana-
log technology. For this you must send signals using the
dual-tone multifrequency signalling (DTMF) process.
Depending on how your system is configured (automat-
ic tone dialling on or off - to be configured by the service
engineer) you must first switch to DTMF dialling. This
means, for example, that you can communicate with a
variety of voice storage systems.
You will find further details in the operating instructions
for the relevant applications.
Automatic tone dialling is not active
During a connection you must first switch to dual-tone
multifrequency signalling.
p
You are on a call.
Call the system menu.
Menu
[
Select and confirm the menu item.
[
Select and confirm the menu item.
o
Enter the numbers. All entries are sent as DTMF sig-
nals.
Automatic tone dialling is active
o
Enter the numbers. All entries are sent as DTMF sig-
nals.