Call Charge Display; Call Trace - Siemens 3000 Operating Instructions Manual

Step-by-Step
> <
Service?
> <
* 65=Show call
charges?

Call charge display

After a call has ended, the display shows the connec-
tion charges for the current call as standard. If the costs
are to be displayed continuously during an outgoing call,
this function must be requested from the carrier.
Note:
If a call is transferred, the costs are assigned to
the telephone to which the call was transferred
from this point onwards.
You can check and display the call charges for your
phone number as a total for a period that can be set by
the service engineer.
First the call charges for the last charged call are dis-
played. The total call charges are displayed after five
seconds.
This function can also be called by entering the code
( page 84).
c
Press the Talk key.
Menu Call the system menu.
[
Select and confirm the menu item.
[
Select and confirm the menu item.
a
Press the On-hook key to end the process.

Call trace

You can apply to your carrier for "call tracing" on mali-
cious calls. An authorised extension is then in a position
to request the identification of the phone number.
This also works for 30 seconds after the malicious caller
has hung up. However, you should not hang up.
This function can also be called by entering the code
( page 84).
p
You receive a malicious call.
Do not hang up.
Conducting calls – enhanced functions
37