Activating Or Deactivating The Ringer Volume; Activating Or Deactivating The Warning Tone - Siemens 3000 Operating Instructions Manual

Step-by-Step
D
Move the cursor down one line.
...
Save the settings.
Save
Activating or deactivating the ringer
volume:
Deactivating the ringer
«
Hold down the key for a few seconds. A confirmation
tone is sounded.
The ringer is deactivated.
Activating the ringer
«
Hold down the key for a few seconds. A confirmation
tone is sounded.
Note:
The ringer cannot be activated with the star key
if it was deactivated via the menu.
Activating or deactivating the warning
tone
When you activate the warning tone, all other tones are
deactivated. An incoming call is signalled by this brief
tone.
If the handset is in a call pickup group, a pickup call is
also signalled by the warning tone.
Activating the warning tone
«
Hold down the key for a few seconds. A confirmation
tone is sounded.
Beep on Press the Display key within three seconds.
The warning tone is activated.
Deactivating the warning tone
«
Hold down the key for a few seconds. A confirmation
tone is sounded.
Setting the handset
21