Handset Appointment Reminder Function - Siemens 3000 Operating Instructions Manual

Step-by-Step
D E
Calendar/Clock
D E
Alarm Clock
F
Deactivating the alarm clock
An appointment reminder call is signalled in the same
way as an incoming call.
o
Press any key during an alarm call.
Deactivating the alarm clock
The handset is in idle status.
©
Open the menu.
[
Select and confirm the menu item.
[
Select and confirm the menu item.
G
Off Fix the setting.
Save Save setting.
Handset appointment reminder func-
tion
You can arrange for your handset to remind you of an ap-
pointment. Only one appointment can be set. The hand-
set must be in idle status at the time of the appoint-
ment reminder. The appointment reminder function is
deactivated during automatic number redial and when
the room monitor function is active.
Note:
Please note the following:
•
•
•
First set the date and time. This sets the in-
ternal clock of the handset.
Do not switch off the handset after you have
made the settings, otherwise the date and
time will be reset. The appointment reminder
function would otherwise be based on an in-
correct time setting.
Check the date and time and reset from time
to time where applicable.
Additional functions
73