Connecting The Phone To A Pabx; Dialing Modes And Recall; Setting Pauses; Switching Temporarily To Touch-Tone Dialing (Dtmf) - Siemens Gigaset C385 Instruction Manual

Connecting the phone to a PABX

Connecting the phone to
a PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.

Dialing modes and recall

The current setting is indicated by
Changing the dialing mode
The following dialing modes can be
selected:
u
Touch-tone dialing (DTMF)
u
Pulse dialing (DP)
M 4 O
§Menu§
~
Pulse dialing (DP).
§OK§
Or:
~ Q
Touch-tone dialing (DTMF).
§OK§
Setting recall
For operation on a PABX, you may have to
change this value. Please refer to the user
guide of your PABX.
M 4 O 2
§Menu§
~
Enter digits for the recall time
and press
0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 180 ms; 4 = 250 ms; 5 = 300 ms;
6 = 600 ms; 7 = 800 ms
44
‰
.
.
§OK§

Setting pauses

Changing the pause after line seizure
You can change the pause length that is
inserted between pressing the Talk key
c and sending the number.
M 4 O O
§Menu§
~
Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec) and press
Changing the pause after pressing the
Flash key
You can change the pause length if your
PABX requires this (refer to the user guide
for your PABX).
M 4 O 4
§Menu§
~
Enter a digit for the pause
length (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms)
and press
Switching temporarily to touch-
tone dialing (DTMF)
If your PABX still operates with pulse dial-
ing (DP), but you need touch-tone dialing
(DTMF) for a connection (e.g. to listen to
the network mailbox), you must switch to
touch-tone dialing for the call.
Precondition: You are conducting a call or
have already dialed an external number.
*
Press the Asterisk key.
After the call has ended, pulse
dialing is automatically reacti-
vated.
.
OK
§ §
.
OK
§ §