Download  Print this page

Tds Telephone Data Service; Activating Control Relays - Siemens 3000 Operating Instructions Manual

Hipath cordless office hipath 3000 v3.0 or later.
Hide thumbs

Advertisement

Conducting calls – enhanced functions
Step-by-Step
> <
Service?
> <
* 42=Tel. data
service?
TDS code:
40

TDS telephone data service

You can use your mobile phone to control connected
computers and their programs, e. g. hotel services or
information systems.
This function can also be called by entering the code
(
page 84).
c
Press the Talk key.
Menu
Call the system menu.
[
Select and confirm the menu item.
[
Select and confirm the menu item.
ª o
Press the "#" key and enter the required code (0... 9).
The connected computer responds. The computer will
guide you through the data entry process. It will proc-
ess your entries directly.
a
Press the On-hook key to end the process.

Activating control relays

The service engineer can set up a maximum of 4 control
relays that enable various equipment (e.g. door opener)
to be activated and deactivated.
It is possible to access a specific control relay. Depend-
ing on the configuration, the control relays can be
activated and deactivated automatically, or
activated and deactivated automatically on the basis
of a timer.
Prerequisite: The service engineer has set up at least
one switch.
This function can also be called by entering the code
(
page 84).
Activating a control relay
c
Press the Talk key.
Call the system menu.
Menu

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: