Eaton Bussmann Series Installation Manual page 3

CCP2-H4X-_ selector and pistol handles for 8 mm shafts
HAZARD OF ELECTRIC SHOCK,
EXPLOSION OR ARC FLASH
MAY RESULT IN DEATH OR SERIOUS
INJURY
Working on or near energized circuits poses
a serious risk of electric shock. De-energize
all circuits before installing or servicing this
equipment and follow all prescribed safety
procedures.
1.1 Qualified person
For the purpose of this instruction manual, a qualified person:
(a) is familiar with the subject equipment and the hazards involved
with their application, use, administration and maintenance.
(b) is trained and authorized to de-energize, clear, ground, and tag
circuits and equipment in accordance with established safety
practices.
(c) is trained in the proper care and use of personal protective
equipment such as rubber gloves, hard hat, safety glasses or face
shields, arc-flash clothing, etc., in accordance with established
safety practices.
(d) is trained to render first aid.
(e) has received safety training to recognize and avoid the hazards
involved.
(f) has the skills and knowledge pertaining to the construction and
operation of this equipment and its installation.
IMPORTANT: These procedures do not claim to cover all possible
details or variations encountered with the installation of these
selector and pistol handles, nor do they provide for all possible
conditions that may be encountered. If further information is
desired or needed to address any particular issue not covered in this
document, contact your Bussmann series product representative.
The information in this document does not relieve the user from
exercising good judgment, nor from using sound safety practices.
Note: Because Eaton has a policy of continuous product
improvement, we reserve the right to change design specifications
without notice. Should a conflict arise between the general
information in this document and the contents of drawings or
supplementary material, or both, the latter shall take precedence.
For the latest version of this instruction manual, download
Publication No. 3A3695 from Eaton.com/bussmannseries.
2.1 Safety concerns
This installation manual is not comprehensive. It is assumed the
installer will follow established safety procedures for working in an
electrical environment. For more information on safety precautions
and procedures, consult the following websites:
National Fire Protection Association (NFPA
•
Underwriters Laboratories (UL
•
National Electrical Mfgrs. Association (NEMA
•
American National Standards Association (ANSI
•
Institute of Electrical and Electronics Engineers (IEEE
•
www.ieee.org
) www.nfpa.org
®
) www.ul.com
®
) www.nema.org
®
® ) www.ansi.org
)
®
Contents
Mounting location/handle rotation
Panel front/clockwise handle rotation
Right panel side/clockwise rotation
Left panel side/counterclockwise rotation
Installation manual 3A3695
Effective April 2018
Page
4
7
10
Eaton.com/bussmannseries
3