Eaton Bussmann Series Installation Manual page 2

Installation manual 3A3695
Effective April 2018
Switch and switch handle applications
Please review the chart below to ensure your switch is compatible with the handle contained in this kit. Shafts are not included and must be
purchased separately.
If you have this CCP
catalog number Description
CCP2R-(pole)-30CC
CCP2R-(pole)-30M
CCP2R-(pole)-30CF
CCP2R-(pole)-60CF
Right front rotary, clockwise operated
switch
CCP2R-(pole)-100CF
CCD2R-(pole)-30
CCD2R-(pole)-60
CCD2R-(pole)-100
CCP2RL-(pole)-30CC
CCP2RL-(pole)-30M
CCP2RL-(pole)-30CF
CCP2RL-(pole)-60CF
Left front rotary, clockwise operated
switch
CCP2RL-(pole)-100CF
CCD2RL-(pole)-30
CCD2RL-(pole)-60
CCD2RL-(pole)-100
CCP2S-(pole)-30CC
CCP2S-(pole)-30M
CCP2S-(pole)-30CF
CCP2S-(pole)-60CF
Right side rotary, clockwise operated
switch
CCP2S-(pole)-100CF
CCD2S-(pole)-30
CCD2S-(pole)-60
CCD2S-(pole)-100
CCP2SL-(pole)-30CC
CCP2SL-(pole)-30M
CCP2SL-(pole)-30CF
CCP2SL-(pole)-60CF
Left side rotary, counterclockwise
operated switch
CCP2SL-(pole)-100CF
CCD2SL-(pole)-30
CCD2SL-(pole)-60
CCD2SL-(pole)-100
Handle kit contents
Before proceeding, review the kit contents with the parts listed
below to be sure all necessary components are at hand. Contact
your supplier if any parts are missing.
(4) Backer plate
mounting screws
(1) Shaft
coupler
(1) Handle backer plate with
removable depth gauge and
shaft centering jig
2
Eaton.com/bussmannseries
CCP2-H4X-_ selector and pistol handles for 8 mm shafts
Use any of these handle catalog numbers
(description)
• CCP2-H4X-B1 (selector handle/black/grey)
• CCP2-H4X-R1 (selector handle/red/yellow)
• CCP2-H4X-B2 (pistol handle/black/grey)
• CCP2-H4X-R2 (pistol handle/red/yellow)
• CCP2-H4X-B1L (selector handle/black/grey)
• CCP2-H4X-R1L (selector handle/red/yellow)
• CCP2-H4X-B2L (pistol handle/black/grey)
• CCP2-H4X-R2L (pistol handle/red/yellow)
(1) Switch handle
With either of these shaft
catalog numbers
• CCP2-SH1-290 (11.5"/290 mm)
• CCP2-SH1-490 (19.3"/490 mm)
Required tools
Measuring tape/ruler
•
Pencil/felt tip pen
•
2 mm Allen wrench (selector handle only)
•
2.5 mm Allen wrench (pistol handles only)
•
3 mm Allen wrench
•
Z2/#2 Phillips head screwdriver
•
Straight blade screwdriver
•
Needle nose pliers
•
40 mm knockout punch or hole saw
•
8 mm drill bit for metal
•
Drill
•
Utility knife
•
Hacksaw
•
Metal file
•
Center punch
•
Hammer
•