Usage; Quick Start; Preparation; Replacing The Cpu Card - Renesas RL78/G1F User Manual

RL78/G1F CPU Card User's Manual
5.

Usage

5.1

Quick Start

5.1.1

Preparation

Obtain the Motor RSSK, and perform the steps described in 5.1.1 and 5.1.2, Quick Start, of the user's manual
(R20UT3697EJ).
5.1.2

Replacing the CPU card

Confirm that the INV-BRD is powered off, remove the RX23T-CRD from the INV-BRD, and connect the product in its
place.
(1) Remove the RX23T-CRD.
RX23T-CRD
5.1.3

Preparation for Operation Test

Perform the steps described in 5.1.3 to 5.1.5 of the Motor RSSK user's manual (R20UT3697EJ) to prepare for motor
drive.
5.1.4

Operation Test

Perform the steps described in 5.1.6 to 5.1.9 of the Motor RSSK user's manual (R20UT3697EJ) in the order indicated,
turn on the power supply, enable motor rotation, change the motor rotation speed, and stop motor rotation.
5.1.5

Finishing the Operation Test

After the operation test is finished, confirm that the motor shaft is no longer rotating and turn off the stabilized power
supply output.
R12UZ0014EJ0100 Rev.1.00
Apr. 5, 2017
INV-BRD
Figure 5.1 CPU card replacement
(2) Make sure the INV-BRD
connectors are correctly aligned, and
mount the RL78/G1F CPU card.
RL78/G1F CPU card
User's Manual
Page 11 of 23