RL78/G1F CPU Card User's Manual
6.6
Encoder Signal Input
The product is equipped with an encoder signal input connector. This makes it possible to input the encoder signal to
the RL78/G1F. The signal input to the product is pulled up to 5 V and passed through an RC filter before being input to
the RL78/G1F. Table 6.8 lists the pin assignments of the signal input connector, and Table 6.9 lists connector
information.
Table 6.8 Pin Assignments of Encoder Signal Input Connector (CN3)
Pin No.
Pin Function
1
5V
2
GND
3
A-phase
4
B-phase
5
Z-phase
Table 6.9 Encoder Signal Input Connector Information
Part
Connector (CN3)
R12UZ0014EJ0100 Rev.1.00
Apr. 5, 2017
Product No.
B5B-XH-A
RL78/G1F Connection Pins
EV
DD0
EV
SS0
P00/TRGCLKA
P01/TRGCLKB
P50
Manufacturer
J.S.T. Mfg. Co. Ltd.
User's Manual
Page 16 of 23