Battery Dismounting, Information, Recharging; Reflector Prisms - Kolida Total Station KTS-462R10L Manual

· Battery Recharging
☆ Battery should be recharged only with the charger NC-30 together with the instrument.
☆ Remove on-board battery from instrument and connect to battery charger. When the indicator
lamp on the battery charger is orange, the recharging process has begun and will be completed
in about 3 hours. When charging is complete (indicator lamp turn green), remove the battery
from the charger and disconnect the charger from its power source
· Battery Recharging Caution
☆ The charger has built-in circuitry for protection from overcharging. However, do not leave the
charger plugged into the power outlet after recharging is completed.
☆ Be sure to recharge the battery at a temperature of 0° ～ ± 45 ° C, Recharging may be abnormal
beyond the specified temperature range.
☆ When the indicator lamp does not light, even after connecting the battery and charger, either the
battery or the charger may be damaged.
· Battery Charging Caution
☆ Rechargeable battery can be repeatedly recharged 300-500 times. Complete discharge of the
battery may shorten its service life.
☆ In order to get the maximum service life, be sure to recharge it once a month.

4. REFLECTOR PRISMS

During distance measurement, a reflector prism needs to be placed at target place. Reflector
systems come with single prism and triple prisms, which can be mounted with tribrach on a tripod,
or mounted on a prism pole. Unique Mini prism system allows to be set up at corners that are hard
to reach.
Illustrated are the prism manufactured by KOLIDA:
www.kolidainstrument.com
.
21