Sending A Message In The Message Tray After Editing - JRC JMR-7230-S3 Instruction Manual

6.11.3 Sending a message in the message tray after
editing
1
Click the message to copy in the message list.
2
Click on the [Edit] or [Select] button.
When the AIS Message Tray is displayed by opening the AIS Message Tray submenu:
Click the [Edit] button.
The [Edit and Send AIS Message] dialog box appears, and the AIS message will be copied to
the [Edit and Send AIS Message] dialog box. When a message is sent by specifying an MMSI
code, the MMSI code will also be copied:
When the AIS Message Tray was displayed by clicking the [View Tray] button in the [Edit
and Send AIS Message] dialog box: Click the [Select] button.
The AIS message will be copied to the [Edit and Send AIS Message] dialog box. The MMSI
code is not copied by this method.
Section 6 Target Tracking and AIS
6-68