Displaying Target Id No - JRC JMR-7230-S3 Instruction Manual

To erase multiple targets
1
Place the cursor on the tracked target to be cancelled and then right-click.
The context menu is displayed.
2
Click on the [Cancel TT mode] on the Context menu.
The cursor changes to the selection cursor.
3
Place the cursor on another target to be cancelled and then click on.
4
Repeat the operation in step 3.
The vector symbols of the clicked tracked targets disappear and only the radar image remains.
To erase all targets
1
Place the cursor on the tracked target to be cancelled and then right-click.
The context menu is displayed.
2
Click on the [Cancel all TT mode] on the Context menu.
The vector symbols of all the tracked targets disappear and only the radar image remains.
Note
If all targets are cancelled, the tracking of all targets will stop; thus, automatic acquisition or
manual acquisition must be performed newly. Unless necessary, do not cancel all targets.

6.5.5 Displaying Target ID No.

A target ID number is a value displayed beside the acquisition symbol when a target is acquired.
A target ID number 1 to 100 is automatically assigned to each target in acquisition order. Once a target
ID number is assigned, it identifies the target until the target is lost or the target acquisition is canceled.
Memo
The ID number is always displayed for only targets with which numeric data is displayed.
1
Click on the [Menu] button on the left toolbar.
The menu is displayed.
2
Click on [View] - [Options] - [Target].
The "Target" dialog is displayed.
Section 6 Target Tracking and AIS
6-26